30000m3/H 産業換気用省エネ軸流蒸発空気冷却器

基本情報

モデル番号。	CY-30TA/DA
認証	CE
状態	新しい
水槽	30L-120L
ノイズ	79dB
コントローラー2	周波数インバーター コントローラー 12 速度
風出口タイプ	上、下排出
コントローラー1	手動コントローラー 1 速度
電圧2	三相 380V 50Hz/60Hz
力	3.0kw
ファンの種類	アキシャルエアクーラー
電圧1	三相、220V、50Hz/60Hz
気流	30000m3/H
輸送パッケージ	木製またはカートン
仕様	CY-30TA/DA
商標	英石
起源	台州
HSコード	84796000
生産能力	5000/月

製品説明

モデル：	CY-30TA/DA
気流：	30000m3/h
電圧：	単相220V/50HZ 三相380V/50HZ 可変周波数

If you need more details please contact with me .Cecilia is 24 hours available for you. It's really my honor if I can do any help for you.Axial Evaporative Air Cooler (CY-30TA/DA) we have Top and Down dischargeCY-30TA/DA is the newest model in our factory, the air flow is 30000m3/h, and it has 7 advantages: (1) The special design of the bottom of the air cooler, it makes the machine stronger. (2) The wind barrels using the standalone anechoic wind barrels to reduce the noise. (3) We make a special design on water knockout drum. AS usual many factory uses 8 water knockout drum, it make many stoppages, but we take 4, it can avoid this problem. It's easy to use and maintain. In addition, the water knockout drum is wrapped the wet curtain, it can prevent water droplets splashing(4) We just take one drowned pump, it Reduce the maintenance rate. The importantly, drowned pump can prevent the burn when the water immersion the bottom. (5) The different design of the air cooler covering, solidness is very high; it doesn't need the plastic pipe to support, so it can save the cost. (6) And this new model, can install dust screen, it easy to wash(7) We are the manufacture so we can promise the quality and the beautiful color. We hope you will like this model, Your satisfaction is our goal. We will try our best to create the more powerful and excellent big airflow air coolerPlease comply with below items strictly when using the product. If any happen because of uncorrected usage of the products, the company has no responsibility. 1. The water level should not be over'MAX' scale for any time. In cool mode, the water level should not be under 'MIN' scale. 2. Once the environmental humidity is too high, please use fan function, as cool mode is always with humidity effect. 3. When evaporative cooler is charged with water, make sure that it is without incline or collision when placing or moving to avoid overflow. It is forbidden to turn over the unit in using, prevent accidents. 4. Please do not put anything on the evaporative cooler; Especially covering air outlet is prohibited. Make sure there is no obstacle in 1m distance of the front and back of the unit. 5. When there is no water in tank, the pump won't work in cool mode. 6. The unit has to cut off power supply and plug off during maintenance or clean. 7. Please use a damp cloth (add some detergent) to clean the until. Do not use corrosive solvent and flushing is not allowed. 8. Please plug off the unit immediately, when the unit charged with watet falls down. Only use it after drying it. Otherwise, it may damage the unit...9. Avoid the air inlet and outlet to approaching wall curtain, etc. Otherwise it will choke air, low effect of the unit. 10. Do not knock or vibrate the unit in using, it may cause automatic stop and need restart. 11. Please plug off when the unit is not in use. Note: The control panel can't touch water. Because the unit has high voltage, it has to cut off power supply and plug off when clean. 12. If the power cord is broken in order to avoid danger, it is necessary to changed by professional technicians. 13. Attentions when replacing or changing batteries of remote controller: (1) Replace same specification battery, and notice the polarity. (2) do not free throw waste batteries, prevent environment pollution. (3) Please put out battery if not used for long time.